*RMC13003 - 09/17/2007 - ROPEDRVR abends with ASRA after certain types
*                        of printer maintenance.
*
*Problem Summary:
*    If an active printer (a printer printing reports) is updated by
*    the ROMT option 9 panel or the SOOP/PROP/RCMS/RCMP transaction
*    and all the reports for the printer are removed, the ROPEDRVR
*    task will loop and then ASRA trying to update the current report.
*
*Symptoms:
*    The loop control register R0 goes negative because it starts at
*    zero and is not tested.  The value in R0 is the number of reports
*    assigned to the printer.  This causes the search for the current
*    report entry to run off the end of allocated storage.
*
*Temporary Fix:
*    The following replacement object modules must be obtained from
*    technical support:
*        ROPEDRVR
*
*SPECIAL INSTRUCTIONS:
*    Until this fix is applied, you should drain the printer prior to
*    performing the maintenance.  The subsequent start of the printer
*    will cause the value of PCRCURRP to be recalculated correctly.
*
*Permanent Fix:
*    This problem will be corrected by PTF in the next release of
*    ROPES.
*
*End Of Document